Probe Heads
Probe Heads
The probe head forms the heart of every coordinate measuring machine. Combined with a probe, it generates the measurement data during inspection cycles.

Manual heads for touch trigger probes provide excellent basic capabilities. The automatic probe heads extend that capability with a kinematic joint for the coupling of scanning probes and laser scanners. Our continuous wrists offer servo wrist flexibility, where styli can be aligned in any direction.




HH-A-T2.5 / HH-AS-T2.5 Automatic 2.5° Probe Heads


The HH-A-T2.5 is capable of indexing in 2.5° increments and can achieve 12,240 unique positions.

The head is fitted with a kinematic joint (TKJ) which can be connected to a Multiwire to give multi sensor support.

The TKJ can be changed either manually without the need for requalification or automatically with the HR-R tool changer.



» more
HH-A-H2.5 / HH-AS-H2.5 Automatic HD Probe Heads


The HH-A-H2.5 is capable of indexing in 2.5° increments and can achieve 20,736 unique positions due to increased rotation of the A Axis (± 180°).

The head is fitted with the Heavy duty kinematic joint (HDKJ), which can be connected to a Multiwire to give full multi sensor support.

The HDKJ carries extensions of up to 750mm. Laser scanners and scanning heads can be supported further from the axis of rotation than with conventional probe heads due to the combination of extreme rotational torque and the HDKJ adaptor.

The HDKJ can be changed either manually without the need for requalification or automatically with the HR-R tool changer fitted with the optional HR-RH Heavy duty module changer.



» more
HH-T Manual Probe Head


Reliable, flexible and inexpensive - The HH-T is an articulated probe head that can be manually rotated to an infinite number of angular attitudes. Gets to any angle you need.


» more
HH-MI Manual Probe Head


The HH-MI is a probe head with an accurate indexing probe stylus. The HH-MI can turn to 168 positions and swivel in 15° increments without the need for recalibration.


» more
HH-MI-M Manual M8 Probe Head


The HH-MI-M is a probe head with an accurate indexing probe stylus. The HH-MI-M can turn to 168 positions and swivel in 15° increments without the need for recalibration. It can accept all probes and accessories with an M8 connection.


» more
HH-A / HH-AS Automatic 7.5° Probe Heads


This fully motorized, highly accurate probe head is the universal system component for use with any multicoordinate measuring machine, whatever the model or manufacturer. It can be used with extension bars up to 300 mm long.

Sensors can be connected to the Probe Head with a kinematic joint (HH-A-T7.5 and HH-AS-T7.5) or a M8 threaded connection (HH-A-M7.5 and HH-AS-M7.5).

The Probe Heads are capable of indexing in 7.5° increments and can achieve 720 unique positions.



» more
HH-A / HH-AS Automatic 5° Probe Heads


This fully motorized, highly accurate probe head is the universal system component for use with any multicoordinate measuring machine, whatever the model or manufacturer. It can be used with extension bars up to 300 mm long.

Sensors can be connected to the Probe Head with a kinematic joint (HH-A-T5 and HH-AS-T5) or a M8 threaded connection (HH-A-M5 and HH-AS-M5).

The Probe Heads are capable of indexing in 5° increments and can achieve 3024 unique positions.



» more
HH-ACW-43MW Continuous Wrist


The HH-ACW-43MW continuous wrist is a heavy-duty precision mechanism able to quickly orient the probe to any attitude following precise 3D trajectories. Its speed and motion are continuously controlled by the system controller to reach maximum machine efficiency.


» more


Print Print